How do you change the pin on the driver side door of a 2000 gmc jimmy? - pin latch
My door is oriented downward closure, which makes it impossible, in the bar ... She told me I should change the pin and bushings. What is the easiest way to do this?
Monday, January 4, 2010
Pin Latch How Do You Change The Pin On The Driver Side Door Of A 2000 Gmc Jimmy?
Subscribe to:
Post Comments (Atom)
5 comments:
Remember, two doors last week!
I use an engine hoist, the doors through the window openings support (many use padding). Remove the "C" clip on the pins if necessary. ) All of a sudden long reader of the old PIN (and on the ground, from top to bottom. Move slightly to the middle door of the old bushings and drive unit in the messages. You can disconnect the wiring, but not necessary.
Note how the front jacks to put in use the other door as a guide. It is really hard work, but the doors are heavy. You need to support secure.
Verification SPRNG, replacement is squeezed in a vice, and retain the use of two threads is highly compressed and then leave them at the door and the narrowest point of the clip and wires of a pair of diagonal.
to drift and realize if you can them.if achieve them, then you can remove the door.if the door, draw a picture about the hinge so you can remove to create.
the only thing easier than calling the pins are paying more ... "Easiest way to do this:" The question is, what is the easiest way around the wheel ... ridiculious is again!
Answer Mans Dodge later, but I can add, go to auto zone and buy a spring compressor to the door that will make life easier. It is a tool that compresses the srping, then the spring in place and unscrew the tool until the spring Intack. I bought one of these tools for about $ 8, and they have used many times. It is good to have and people want to get a loan.
I own a shop, and it is not easy, but you can do pin-set costs about $ 8, and you need a real reason for their correction, and an assistant, calling the former pin, while Jack helps the door keep and keeps a close ally, if all connections are easy with the door and replace the caps on both sides, and then set into the rear door, and put new pins again, it can be difficult to go online, so be careful not on the rings full damages if it is your cycle of sources, it will be difficult to get the rear door on the website, but you can do, do it all the time here in the shop, good luck with it, I hope this help, s.
Post a Comment